LC P-16 is a P-System joint for lightweight panels that combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint. Due to its width, the LC P-16 is anchored in the surface layers and acts as an adapter into which a Clamex P-14 connector with lever is slid in. The LC P-16 thus enables extremely strong, detachable connections in lightweight construction without the time-consuming use of concealing timber edges or adhesives.

The LC P-16 lightweight connector significantly improves the machining and assembly process. The time-consuming use of a concealed timber edge is thereby eliminated, which speeds up the production process and also saves material. The simple assembly – the connector is simply slid in – completely eliminates waiting times due to glueing. The result is a fast, smooth process that reduces time and costs in both manufacturing and assembly, without compromising on aesthetics, stability and quality.

With the three available sizes LC P-16×11, LC P-16×17 and LC P-16×22, joints in the most common lightweight panels are possible. Machining with two to three milling operations is carried out either with the Zeta P2 or, even more efficiently, with the CNC machining centre. For machining with the Zeta P2, the P-system depth adjuster is set to 18 mm and the 2 mm depth adjuster cap is then attached to achieve a milling depth of 16 mm. To ensure that the next millings are positioned precisely one above the other, the access hole is drilled after the first milling with the Clamex P drill jig with the P-16 interchangeable element insert. The positioning clip on the Zeta P2 engages in the hole and ensures that the millings are positioned exactly on top of each other. The height is adjusted via the angle stop. The recurring height adjustments of the angle stop can be adjusted efficiently using self-made spacers, for example made of leftover wood.

The LC P-16 configurator determines the right product size and milling positions for the respective application. LC P-16 is only required for anchorage of the Clamex P-14 connector halves in the front side of the lightweight panel. The Clamex P-10 connector halves are pushed directly into the cover plate and anchored. Clamex P-14 Flexus or Clamex P-14 CNC can also be used in the LC-P16 instead of the Clamex P-14 connector halves. The Clamex P-10 connector halves are best suited as counterparts for the surface. If the surface layer is more than 4 mm, the Clamex P-14 connector half with its offset profile is also well suited. The Clamex P-10 Medius connector half without lever also works, but is less well guided when sliding in due to its recess on the back. Other suitable P-system connectors for glued joints are Tenso P-14 or Bisco P-14.

Applications:
– For lightweight construction materials made of cardboard or plastic honeycomb, wood fibre shaft or hard foam (e.g. XPS)
– For light chipboard with a weak middle layer with additional fastening via glue channels
– In interior fittings for large shelves or sideboards, mounted floating on a wall
– In furniture-making for wide shelves with a span of more than 1 m due to the high rigidity
– In trade fair construction or shopfitting to reduce transport weight, ideal for flat-pack furniture
– Camper vans and motor homes, caravans
– Vehicle and boat interiors
– Butt joints from a material thickness of 12 mm
– Surface connections from 16 mm

• Wear-free connection;
• High clamping force;
• Various materials.

Description:

Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ideal when joining wood composites with materials such as aluminium, steel or compact laminate.

After installing the connector in the board, the pre-assembled metric screw is screwed into a threaded hole or a socket, using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels.

The Cabineo insert M6 is a threaded insert to drive in, which can be used in combination with the Cabineo 8 M6. It is ideal for applications where the thread cannot be cut directly into the workpiece or to increase the strength in corner and dividing panel joints. The Cabineo insert M6 is hammered into the through-hole of the middle panel so that the Cabineo can reach into the insert from both sides. The same connector and insert can be used everywhere for corner and dividing panels.

See In Action:

Product Information:

Various Materials:

• The highly efficient, simple and accurate joining system for panels.
• Quick joining with the ready-to-use cordless power tool without connecting it to a power outlet.
• Multifunctional stop square, swivelling front stop with fixed pivot point and high-precision application surfaces.

   

• Classic X is the original biscuit joiner from the inventor of the system and provider of the complete solution;
• The highly efficient, simple and accurate joining system for panels;
• Multifunctional stop square, swivelling front stop with fixed pivot point and high-precision application surfaces.

   

• Detachable connector for miters from 30-180° and for butt-joints;
• Small opening 6 mm;
• Installation with any Lamello biscuit joiner.

Detachable furniture connector for the 4 mm. groove.

• Open the connection time and time again with the rotating lever;
• Use with any biscuit joiner;
• Narrow connector allows installation into the edge in materials from 8 mm.

• For the fast, form-locking anchorage of all P-System connectors in all angles;
• Thanks to the cordless freedom, there are no tripping hazards during daily use;
• The automatic vertical movement creates a profile groove enabling insertion of the connectors by hand.

   

• For the fast, form-locking anchorage of all P-System connectors in all angles;
• The automatic vertical movement creates a profile groove enabling insertion of the connectors by hand;
• Fast, easy and precise working with the well-known Lamello system.

• For 90° or 45° drill holes;
• Large color palette;
• Inserted in seconds.

Description:

The Clamex cover caps serve to cover the Clamex P drill holes. They are available for 90° joints as well as 45° joints. There are eleven colors available currently in order to match various wood species and painted materials.

Corresponding System Products:

Detachable connector for materials from 12 mm. thickness.

• Detachable connector with very small opening;
• Extremly fast insertion of the fittings without tools;
• For thinner material thicknesses from 12 mm or miters in 16mm.