• Two high-quality LEDs ensure the best view of the workpiece.
• The PS 2-18 was designed to ensure the best possible view of the saw blade.
• Changing the saw blade is incredibly easy. Simply release the ergonomically positioned tension lever and conveniently remove or secure the saw blade.
• Even without a vacuum cleaner, shavings are removed cleanly and directly at the saw blade via the extraction channel integrated into the base plate.

Application Area:

• Straight cuts with guide rail and CUnex
• Guided circular cuts with parallel fence P-PA and CUnex
• Excerpts
• Bevel cuts up to 45°
• Material usage depends on the saw blade; see special accessories/tools.

Product Description:

Limits are there to be overcome. With its powerful battery drive, the PS 2-18 performance jigsaw goes to entirely new heights, leaving no room for compromise in terms of precision, power, and comfort. It offers all the advantages of the MAFELL jigsaw concept and raises the bar even higher with its ergonomic balance and smart light management. For everyone who demands the highest standards from their work.

Thanks to its ergonomic design, soft-grip surfaces, and clever weight distribution, the PS 2-18 can be optimally guided even in difficult working positions and fits perfectly in the hand. The wide base plate and low center of gravity ensure it rests securely and always at a right angle to the workpiece.

From the innovative saw blade mount to its extremely powerful drive, the PS 2-18 is designed for precise right-angle cuts – in all areas of application.

With its versatile range of accessories, the PS 2-18 is the ideal solution for almost any situation. A clear practical advantage: circle cutter, parallel guide, and guide rail adapter are combined in a single, ingenious accessory.

Technical Data:

Delivery Specification:

• PS 2-18 PURE cordless performance jigsaw in the MAX3: MAA91C123

Delivery Scope Includes:

• Optimal chip ejection, especially when sawing insulation materials.
• Bright LED lights provide broad illumination of the work area.
• Sawing according to the marked line. The scriber automatically adjusts to the set tilt angle.
• For greater cutting depths up to 88 mm. Even with a guide rail, an exceptional 82 mm is achieved.
• The cutting depth can be adjusted and locked with just one movement.
• The innovative angle adjustment allows for optimal readability of the scale.
• With the new base plate, the handheld circular saw can also be used as a miter saw. A guide rail is required for this.

Application Area:

• Cross-sections and longitudinal sections
• Bevel cuts / miter cuts up to 60°
• Notched cuts
• plunge cuts
• Bevels, chamfers
• Materials used include: solid wood, panel materials, insulation, doors, worktops, interior finishing and renovations.

Product Description:

The K 85-18 is exceptionally well-prepared for future challenges in the woodworking industry. This is due not only to its exemplary material and workmanship quality, but also to its well-designed user-friendliness and compatible dual-battery technology.

With the MAFELL ErgoBalanceConcept, our handheld circular saws are optimized for all types of work. This enables not only precise work but also ergonomically optimal guidance. This effectively reduces fatigue.

Now, concentrated power and high torque have a name: CUprex, the high-performance motor with performance-optimized digital electronics and newly developed control technology. The speed can be continuously adjusted to suit different materials and applications.

There is no longer any need to unscrew the splitting wedge – the FLIPPKEIL offers you optimal user comfort and safety when immersing.

Technical Data:

Delivery Specification:

• Cordless circular saw K 85-18 PURE in L-MAX: MAA91E324

Delivery Scope Includes:

• Optimal chip ejection, especially when sawing insulation materials.
• Bright LED lights provide broad illumination of the work area.
• Sawing according to the marked line. The scriber automatically adjusts to the set tilt angle.
• For increased cutting depth up to 110 mm. Even with a guide rail, an exceptional 104 mm is achieved.
• The cutting depth can be adjusted and locked with just one movement.
• The innovative angle adjustment allows for optimal readability of the scale.
• With the new base plate, the handheld circular saw can also be used as a miter saw. A guide rail is required for this.

Application Area:

• Cross-sections and longitudinal sections
• Bevel cuts / miter cuts up to 60°
• Notched cuts
• plunge cuts
• Bevels, chamfers
• Materials used include: solid wood, panel materials, insulation, doors, worktops, interior finishing and renovations.

Product Description:

Technical Data:

Delivery Specification:

• Cordless circular saw K 105-18 PURE: 91D324

Delivery Scope Includes:

• Sanding of coatings and impurities
• Sanding out unevenness at the edges of repaired surfaces
• Flatting of bodyfiller and composite materials
• Flatting of primer filler
• Keying of old and new lacquers
• Producing a matt finish on old and new lacquers for blending

Range:

• Discs, 5 inch and 6 inch
• Perforated roll, 2.75 inch x 10.5 metres
• 60-800 grit
• Multi-hole, 6-hole, 7-hole, 9-hole, 15-hole, 21-hole

Profile:

• Grit type:
  Mixed grit with ceramic content – 60 – 180
  Ceramic aluminium oxide – 220 – 600
  Aluminium oxide – 800
• Backing: Film
• Coating: Electrostatic
• Bonding: Resin over resin
• Special coating: Stearate 220–800

Application:

• Colour
• Primer filler
• Bodyfiller
• Lacquer
• Old lacquer
• Primer coat
• Epoxy primer coat
• Cathodic dip primer coat
• Plastics
• Acrylic glass
• Gelcoat polyester
• Glass-fibre reinforced plastic (GRP)

Advantages:

• Cool design, maximum reliability
• Innovative coating technology, maximum productivity
• Best quality, maximum lifetime
• Powerful ceramic grit
• Strong filmbacking

See In Action:

LC P-16 is a P-System joint for lightweight panels that combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint. Due to its width, the LC P-16 is anchored in the surface layers and acts as an adapter into which a Clamex P-14 connector with lever is slid in. The LC P-16 thus enables extremely strong, detachable connections in lightweight construction without the time-consuming use of concealing timber edges or adhesives.

The LC P-16 lightweight connector significantly improves the machining and assembly process. The time-consuming use of a concealed timber edge is thereby eliminated, which speeds up the production process and also saves material. The simple assembly – the connector is simply slid in – completely eliminates waiting times due to glueing. The result is a fast, smooth process that reduces time and costs in both manufacturing and assembly, without compromising on aesthetics, stability and quality.

With the three available sizes LC P-16×11, LC P-16×17 and LC P-16×22, joints in the most common lightweight panels are possible. Machining with two to three milling operations is carried out either with the Zeta P2 or, even more efficiently, with the CNC machining centre. For machining with the Zeta P2, the P-system depth adjuster is set to 18 mm and the 2 mm depth adjuster cap is then attached to achieve a milling depth of 16 mm. To ensure that the next millings are positioned precisely one above the other, the access hole is drilled after the first milling with the Clamex P drill jig with the P-16 interchangeable element insert. The positioning clip on the Zeta P2 engages in the hole and ensures that the millings are positioned exactly on top of each other. The height is adjusted via the angle stop. The recurring height adjustments of the angle stop can be adjusted efficiently using self-made spacers, for example made of leftover wood.

The LC P-16 configurator determines the right product size and milling positions for the respective application. LC P-16 is only required for anchorage of the Clamex P-14 connector halves in the front side of the lightweight panel. The Clamex P-10 connector halves are pushed directly into the cover plate and anchored. Clamex P-14 Flexus or Clamex P-14 CNC can also be used in the LC-P16 instead of the Clamex P-14 connector halves. The Clamex P-10 connector halves are best suited as counterparts for the surface. If the surface layer is more than 4 mm, the Clamex P-14 connector half with its offset profile is also well suited. The Clamex P-10 Medius connector half without lever also works, but is less well guided when sliding in due to its recess on the back. Other suitable P-system connectors for glued joints are Tenso P-14 or Bisco P-14.

Applications:
– For lightweight construction materials made of cardboard or plastic honeycomb, wood fibre shaft or hard foam (e.g. XPS)
– For light chipboard with a weak middle layer with additional fastening via glue channels
– In interior fittings for large shelves or sideboards, mounted floating on a wall
– In furniture-making for wide shelves with a span of more than 1 m due to the high rigidity
– In trade fair construction or shopfitting to reduce transport weight, ideal for flat-pack furniture
– Camper vans and motor homes, caravans
– Vehicle and boat interiors
– Butt joints from a material thickness of 12 mm
– Surface connections from 16 mm

Product Features:

With CUprex, the high-performance motor 65 mm (2 9/16 In.) cutting depth With revolving depth stop.

• With CUprex, the high-performance motor;
• Special machine for grooves;
• Compatible with guide rail system F.

Application Area:

• Lengthwise and crosswise grooves;
• Frieze blocks (with guide);
• Panels in half-timbered buildings, false floors;
• Birdsmouth joints up to 45°;
• Tenon;
• Compatible materials include solid wood and board materials.

Product Description:
The Groove cutting machine NFU 50 offers flexibility of use and is an allrounder capable of executing an enormous range of timber construction tasks. An extensive range of accessories opens up further possibilities for day-to-day work. The design of the NFU 50 is characterized by the use of extremely rugged, high-quality and precision-made parts, including the lightweight magnesium die-cast housing and impact-resistant, fiber glass-reinforced plastic components. It also features clever technical details to help you meet the rigors of the job.

Technical Data:

Delivery Specification:

• Groove Cutting Machine NFU 50:  918723

Delivery Scope Includes:
• 1 Cutter Head: 091901 Ø 163 x 60 mm
• 1 Position Indicator NFU-PA: 207467
• 1 Side Fence SA 625: 207183
• 1 Parallel Fence: 207468
• 1 Guide Track L: 208171; Max. Milling Length 14-1/2″ / 370 mm
• 2 Repeat Fence: 206026
• 1 Allen Key SW 6: 207496
• 1 Screwdriver Torx T15: 093274

See In Action:

Technology: S Performance

• Colour

• Primer Filler

• Bodyfiller

• Lacquer

• Old Lacquer

• Primer Coat

• Epoxy Primer Coat

• Cathodic Dip Primer Coat

• Plastics

• Acrylic Glass

• Gelcoat Polyester

• Glass-Fibre Reinforced Plastic (GRP)

See In Action:

Technology: S Performance

• Colour

• Primer Filler

• Bodyfiller

• Lacquer

• Old Lacquer

• Primer Coat

• Epoxy Primer Coat

• Cathodic Dip Primer Coat

• Plastics

• Acrylic Glass

• Gelcoat Polyester

• Glass-Fibre Reinforced Plastic (GRP)

Technology:
S Performance