LC P-16 is a P-System joint for lightweight panels that combines the advantages of lightweight construction with the efficient and aesthetic Clamex joint. Due to its width, the LC P-16 is anchored in the surface layers and acts as an adapter into which a Clamex P-14 connector with lever is slid in. The LC P-16 thus enables extremely strong, detachable connections in lightweight construction without the time-consuming use of concealing timber edges or adhesives.

The LC P-16 lightweight connector significantly improves the machining and assembly process. The time-consuming use of a concealed timber edge is thereby eliminated, which speeds up the production process and also saves material. The simple assembly – the connector is simply slid in – completely eliminates waiting times due to glueing. The result is a fast, smooth process that reduces time and costs in both manufacturing and assembly, without compromising on aesthetics, stability and quality.

With the three available sizes LC P-16×11, LC P-16×17 and LC P-16×22, joints in the most common lightweight panels are possible. Machining with two to three milling operations is carried out either with the Zeta P2 or, even more efficiently, with the CNC machining centre. For machining with the Zeta P2, the P-system depth adjuster is set to 18 mm and the 2 mm depth adjuster cap is then attached to achieve a milling depth of 16 mm. To ensure that the next millings are positioned precisely one above the other, the access hole is drilled after the first milling with the Clamex P drill jig with the P-16 interchangeable element insert. The positioning clip on the Zeta P2 engages in the hole and ensures that the millings are positioned exactly on top of each other. The height is adjusted via the angle stop. The recurring height adjustments of the angle stop can be adjusted efficiently using self-made spacers, for example made of leftover wood.

The LC P-16 configurator determines the right product size and milling positions for the respective application. LC P-16 is only required for anchorage of the Clamex P-14 connector halves in the front side of the lightweight panel. The Clamex P-10 connector halves are pushed directly into the cover plate and anchored. Clamex P-14 Flexus or Clamex P-14 CNC can also be used in the LC-P16 instead of the Clamex P-14 connector halves. The Clamex P-10 connector halves are best suited as counterparts for the surface. If the surface layer is more than 4 mm, the Clamex P-14 connector half with its offset profile is also well suited. The Clamex P-10 Medius connector half without lever also works, but is less well guided when sliding in due to its recess on the back. Other suitable P-system connectors for glued joints are Tenso P-14 or Bisco P-14.

Applications:
– For lightweight construction materials made of cardboard or plastic honeycomb, wood fibre shaft or hard foam (e.g. XPS)
– For light chipboard with a weak middle layer with additional fastening via glue channels
– In interior fittings for large shelves or sideboards, mounted floating on a wall
– In furniture-making for wide shelves with a span of more than 1 m due to the high rigidity
– In trade fair construction or shopfitting to reduce transport weight, ideal for flat-pack furniture
– Camper vans and motor homes, caravans
– Vehicle and boat interiors
– Butt joints from a material thickness of 12 mm
– Surface connections from 16 mm

Product Features:

With CUprex, the high-performance motor 65 mm (2 9/16 In.) cutting depth With revolving depth stop.

• With CUprex, the high-performance motor;
• Special machine for grooves;
• Compatible with guide rail system F.

Application Area:

• Lengthwise and crosswise grooves;
• Frieze blocks (with guide);
• Panels in half-timbered buildings, false floors;
• Birdsmouth joints up to 45°;
• Tenon;
• Compatible materials include solid wood and board materials.

Product Description:
The Groove cutting machine NFU 50 offers flexibility of use and is an allrounder capable of executing an enormous range of timber construction tasks. An extensive range of accessories opens up further possibilities for day-to-day work. The design of the NFU 50 is characterized by the use of extremely rugged, high-quality and precision-made parts, including the lightweight magnesium die-cast housing and impact-resistant, fiber glass-reinforced plastic components. It also features clever technical details to help you meet the rigors of the job.

Technical Data:

Delivery Specification:

• Groove Cutting Machine NFU 50:  918723

Delivery Scope Includes:
• 1 Cutter Head: 091901 Ø 163 x 60 mm;
• 1 Position Indicator NFU-PA: 207467;
• 1 Side Fence SA 625: 207183;
• 1 Parallel Fence: 207468;
• 1 Guide Track L: 208171; Max. Milling Length 14-1/2″ / 370 mm
• 2 Repeat Fence: 206026;
• 1 Allen Key SW 6: 207496;
• 1 Screwdriver Torx T15: 093274.

See In Action:

Technology: S Performance

• Colour

• Primer Filler

• Bodyfiller

• Lacquer

• Old Lacquer

• Primer Coat

• Epoxy Primer Coat

• Cathodic Dip Primer Coat

• Plastics

• Acrylic Glass

• Gelcoat Polyester

• Glass-Fibre Reinforced Plastic (GRP)

See In Action:

Technology: S Performance

• Colour

• Primer Filler

• Bodyfiller

• Lacquer

• Old Lacquer

• Primer Coat

• Epoxy Primer Coat

• Cathodic Dip Primer Coat

• Plastics

• Acrylic Glass

• Gelcoat Polyester

• Glass-Fibre Reinforced Plastic (GRP)

Technology:
S Performance

Product Features:

• With CUprex, the high performance motor;

• Excellent chip ejection;

• Practical handle arrangement.

Advantages:

• High quality standard means lower machine costs and longer service life.

• Practical lightweight, ergonomic handle ensures exemplary handling.

• With guide rollers – For maximum utilisation of the planing width.

• Disposable reversible knife system means no more time-consuming planing knife adjustment.

Application Area:

• Cutting width up to 320 mm (12.5 / 8 In.)

• Compatible materials include solid wood.

Technical Data:

Delivery Specifications:

• 1 Reversible Knives, 1 Pair, HL;  091791

• 1 Single-End Spanner 8 mm; 093258

• 1 Mains Cable 10 m (32.8 Ft.); 087805

Product Features:

• With CUprex, the high-performance motor;
• Low weight of 21.1 kg (46.1 lbs);
• Stable height adjustment.

Application Area:

• Birdsmouth cuts and lap joints;
• Compatible materials include solid wood and glue-laminated timber;

Product Description:

The ZK 115 Ec – a persuasive and powerful tool offering ease of use, a tool brake and electronics with:
• Smooth Starting;
• Constant Speed Under Load;
• Overload Protection;
• No-Load Speed Reduction To Protect Machine;
• Reduced Noise Emissions.

The entirely newly developed 150 x 115 mm (5 7/8 x 4 1/2 in.) cutter head of the ZK 115 Ec, with 13 reversible carbide tips (9 for final, 4 for rough cutting), facilitates very high cutting rates, optimum chip removal and an extended service life. Simply score the notch and vertical cut, set the cut indicator, notch depth and angle – and mortising can begin. It couldn´t be quicker or easier! The guide rails available as optional accessories can be used with all other MAFELL carpentry machines.

Technical Data:

Delivery Scope Includes:
• 1 Parallel Guide Fence: 203683;
• 1 Allen Ke: 093164;
• 1 Screw Driver: 093274; Torx T 15;
• 1 Mains Cable 10 m: 087896.

Product Features:

• Intelligent drill guide;
• For series drilling with drilling templates;
• Single column;
• With stop system thanks to parallel fence (See special accessories).

Technical Data:

Application:

• Precision and series drilling;
• Compatible materials include solid wood and laminated beams.

With stop system thanks to parallel fence (See special accessories).

Technical Data:

Applications:

• Precision and series drilling;
• Angle drilling;
• Compatible materials include solid wood and laminated beams.

Advantages:

• The 80 mm. high drill guide comprises six vertically located rollers with an iris-like adjusting mechanism. They enclose the bit without any backlash and thus provide perfect guidance. This arrangement prevents the bit from drifting.
• The tensile force exerted by the polyethylene cable can be individually adjusted, for example, in order to reduce the feed pressure when working horizontally. Once the hole has been drilled, the machine automatically returns to the starting position.
• The S models can be precisely set to +/- 45° in either direction with the aid of a scale; and locked at 0°. The drill tip – at base plate height – always serves as the pivot axis.