Detachable connector for materials from 12 mm. thickness.
Detachable connector with very small opening;
Extremly fast insertion of the fittings without tools;
For thinner material thicknesses from 12 mm or miters in 16mm.
Description:
Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and in butt joints from 12 mm.
See In Action:
Product Information:
A Detachable All-Rounder:
Workpieces connected with the Clamex P can be detached at any time using the rotating lever.
Very Aesthetic:
Only a small, barely visible tool opening of 6mm is used to open and close the connector.
P-System Anchorage:
Tool-free anchoring of connectors, without adhesive or screws.
Fastest Connection:
Connected in seconds with Clamex or Tenso. Connection is complete within seconds, without waiting time, clamps, or post-processing work.
Technical Information:
Size (mm): 52 x 19 x 9.7 mm
Cutter: ø 100.4 x 7 x 22
Material Connector: Fiberglass Reinforced Plastic
Material Lever: Zinc Die Cast
Installation Tolerance:
Longitudinal: ± 0.5 mm
Tensile strength (N) Particle Board:~ 600 N = 60 kg
Tensile Strength (N) MDF: ~600 ≈ 60 kg
Tensile Strength (N)Beech: ~ 900 N = 90 kg
Detachable connector for materials from 12 mm. thickness.
Detachable connector with very small opening;
Extremly fast insertion of the fittings without tools;
For thinner material thicknesses from 12 mm or miters in 16mm.
Description:
Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, Clamex P-10 is firmly connected and disconnected using a lever. Clamex P-10 eliminates the need for glue, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex P-10 is used on mitre joints from 15 mm material thickness and in butt joints from 12 mm.
See In Action:
Product Information:
A Detachable All-Rounder:
Workpieces connected with the Clamex P can be detached at any time using the rotating lever.
Very Aesthetic:
Only a small, barely visible tool opening of 6mm is used to open and close the connector.
P-System Anchorage:
Tool-free anchoring of connectors, without adhesive or screws.
Fastest Connection:
Connected in seconds with Clamex or Tenso. Connection is complete within seconds, without waiting time, clamps, or post-processing work.
Technical Information:
Size (mm): 52 x 19 x 9.7 mm
Cutter: ø 100.4 x 7 x 22
Material Connector: Fiberglass Reinforced Plastic
Material Lever: Zinc Die Cast
Installation Tolerance:
Longitudinal: ± 0.5 mm
Tensile strength (N) Particle Board:~ 600 N = 60 kg
