Cabinet connector and shelf support without edge drilling
For use with CNC without edge drilling;
Secured against pulling out and lifting off; ideal for open shelf units;
Same housing for connectors and adjustable shelves.
Description:
Cabineo X is a connector for cabinets and shelves that can be used with all CNC machines and is pressed into place in the workshop or on site. Due to the open housing, it is possible to insert a Cabineo screw from the top and screw it into the counterpart with a hexagon bit. Using it with screws, Cabineo X is ideal when installing shelves into already joined cabinets or when assembling corner joints. Combined with shelf supports, Cabineo X prevents shelves from being pulled out.
See In Action:
Product Information:
Reduced To The Essentials:
The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels.
Drilling Or Cutting:
The workpiece can be machined either using a drill or a cutter.
For All CNC Machines:
Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also.
Installing Inclined Shelves With Cabineo-X:
In combination with the adjustable floor supports (diameter 3 mm. or 5 mm.), the Cabineo Slanted shelves can also be easily made.
Technical Information:
Size (mm): 33.8 x 16.5 x 10.8 mm.
Cutter: Ø 12 mm. or smaller
Drill: Ø 5 mm. and Ø 15 mm.
Material Of Connector: Fibre-Glass Reinforced Plastic
Installation Tolerance:
Lengthwise: ± 0.5 mm. (Cabineo ± 0.1 mm.)
Cabinet connector and shelf support without edge drilling
For use with CNC without edge drilling;
Secured against pulling out and lifting off; ideal for open shelf units;
Same housing for connectors and adjustable shelves.
Description:
Cabineo X is a connector for cabinets and shelves that can be used with all CNC machines and is pressed into place in the workshop or on site. Due to the open housing, it is possible to insert a Cabineo screw from the top and screw it into the counterpart with a hexagon bit. Using it with screws, Cabineo X is ideal when installing shelves into already joined cabinets or when assembling corner joints. Combined with shelf supports, Cabineo X prevents shelves from being pulled out.
See In Action:
Product Information:
Reduced To The Essentials:
The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels.
Drilling Or Cutting:
The workpiece can be machined either using a drill or a cutter.
For All CNC Machines:
Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also.
Installing Inclined Shelves With Cabineo-X:
In combination with the adjustable floor supports (diameter 3 mm. or 5 mm.), the Cabineo Slanted shelves can also be easily made.
Technical Information:
Size (mm): 33.8 x 16.5 x 10.8 mm.
Cutter: Ø 12 mm. or smaller
Drill: Ø 5 mm. and Ø 15 mm.
Material Of Connector: Fibre-Glass Reinforced Plastic
