Lamello Clamex P-14/10 Flexus

Detachable furniture connector with flexible positioning pins

  • Flexible positioning pins allow freely selectable assembly sequence.
  • Flexible positioning pins align the workpiece and keep it in position.
  • Bevelled and movable positioning pins enable the tilting of the workpiece in both directions.
   
Description:
Clamex P-14/10 Flexus is a detachable connector and is anchored in the form-locking P-System groove within seconds.
Through the minimalist 6 mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence. Clamex P-14 is used in mitre joints from 18 mm material thickness and in butt joints from 12 mm.
See In Action:
Product Information:

Flexible Assembly Sequence:

Flexible positioning pins allow freely selectable assembly sequence.

Installation Of Fixed Shelves:

Fixed shelves or vertical separators can be installed in an assembled cabinet unit.

Versatile Assembly:

Bevelled and movable positioning pins enable the tilting of the workpiece in both directions.

Simple Alignement:

Flexible positioning pins align the workpiece and keep it in position.

Technical Information:

Size (mm): 64 x 13.5 x 9.7 mm 52 x 7.5 x 9.7 mm
Cutter: Ø 100.4 x 7 x 22 mm
Material Connector: Glass Fibre Reinforced Plastic

 

Material Lever: Zinc Die Cast
Installation Tolerance:

 Longitudinal: ± 0 mm

Tensile Strength (N) Particle Board: ⁓ 600

 

Tensile Strength (N) MDF: ⁓ 720

Tensile Strength (N) Beech: ⁓ 810
Categories: , ,

Ready to place your order ?