Lamello Clamex S-18

Detachable, flexible and simple. Installation in an 8 mm groove with screws.

  • Detachable connector for miters from 30-180° and for butt-joints.
  • Small opening 6 mm.
  • Installation with any Lamello biscuit joiner.
Clamex S-18 is a detachable connector. It is inserted into an 8 mm wide groove and held in place with screws. Through the minimalist 6 mm access hole, Clamex S-18 is firmly connected and disconnected using a lever. Clamex S-18 can be used with any Lamello biscuit joiner, allows aesthetic joints at all angles and is ideal for permanently joined or detachable mitres. Clamex S-18 is used in mitre joints from 19 mm material thickness and in butt joints from 15 mm.
Product Information:

A Detachable All-Rounder:

Workpieces connected with the Clamex P can be detached at any time using the rotating lever.

Very Aesthetic:

Only a small, barely visible tool opening of 6mm is used to open and close the connector.


A cutting principle for many different joining elements.

Technical Information:

Size (mm): 66 x 29 x 8 mm
Cutter: ø 100 x 8 x 22
Material Connector: Fiberglass Reinforced Plastic


Material Lever: Zinc Die Cast
Installation Tolerance:
Longitudinal: ± 1 mm
Tensile Strength (N) Particle Board: ~ 800 N ≈ 80 kg


Tensile Strength (N) Beech: ~ 1300 N ≈ 130 kg
Categories: , ,

Ready to place your order ?