Lamello Clamex P-14/10 Medius

Detachable connector for centre panels for materials from 16 mm thickness.

  • Detachable connector with very small opening.
  • Versatility for all angles and joining situations.
  • For separating panels from 16mm material thickness.

Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds.
Through the minimalist 6 mm access hole, Clamex P-14/10 Medius is firmly connected and disconnected using a lever. The connector for divisions has two installation depths and is used when two shelves are attached to the same dividing panel at the same height. Due to the reduced installation depth of 10 mm, the minimal thickness for the division is 16 mm.

See In Action:

Product Information:

Ideal For Separating Panels:

Clamex P-14 Medius enables joints of separating panels with panel thicknesses from 16 mm.

A Detachable All-Rounder:

Workpieces connected with the Clamex P can be detached at any time using the rotating lever.

Fastest Connection:

Connected in seconds with Clamex or Tenso. Connection is complete within seconds, without waiting time, clamps, or post-processing work.

P-System Anchorage:

Tool-free anchoring of connectors, without adhesive or screws.

Technical Information:

Size (mm): 64 x 13.5 x 9.7 mm 52 x 7.5 x 9.7 mm
Cutter: Ø 100.4 x 7 x 22
Material Connector: Fiberglass Reinforced Plastic


Material Lever: Zinc Die Cast
Installation Tolerance:
Longitudinal: ± 1 mm
Tensile Strength (N) Particle Board:~700 N ≈ 70 kg


Tensile Strength (N) MDF: ~ 800 N ≈ 80 kg
Tensile Strength (N) Beech: ~ 900 N ≈ 90 kg
Categories: , ,

Ready to place your order ?