Lamello Cabineo 8

Time-saving furniture connector without edge drilling and with very high clamping force.

  • Efficient machining with all CNC machines;
  • Faster machining and assembly;
  • Stronger connections.

Description:

Cabineo is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The Cabineo is installed in the board either in the workshop or on site. The pre-assembled screw in the connector is screwed into the 5 mm hole of the second workpiece using a cordless drill. Cabineo impresses with its time-saving processing and assembly as well as the high clamping force which leads to stable connections without the need for additional dowels. Cabineo is available in white or black.

See In Action:

 

Product Information:

For All CNC Machines:

Surface machining without addtional drill holes in the edge for wooden dowels. Therefore the maching is possible on simple 3 axis CNC machines also.

Drilling Or Cutting:

The workpiece can be machined either using a drill or a cutter.

Reduced To The Essentials:

The one-part connector features high clamping force and does not require any additional alignment elements such as wood dowels.

Technical Information:

Size (mm): 33.8 x 16.5 x 10.8 mm.
Cutter: ø 12 mm or smaller

Drill: ø 5 mm and ø 15 mm.

Material Connector: Fibre Glass Reinforced Plastic

 

Installation Tolerance:
Longitudinal: ± 0.1 mm.
Tensile Strength: ~ 900 N ≈ 90 Kg.
Categories: , ,

Ready to place your order ?

en_CA